Power Vent Systems for Large Aluminum Enclosure 23x14x12 (RPST-POWERVENT-24)

UGS RPST-POWERVENT-24 Catégories , ,

Power vent systems for use with RemotePro systems. Fits ENC-ST-23x14x12 enclosure. Powered on 12V or 24V battery. Comes with a 1m long 2 wire cable

Plus sur ce produit

The RPST-PowerVent is a field upgradeable power ventilation system for Tycon® ENC-ST enclosures which are used in RPST Remote Power and UPS-ST Outdoor Backup Power systems. The RPST-PowerVent unit replaces the existing access plate located in the bottom of the enclosure. The RPST-PowerVent has a built in thermostat that turns it on when the temperature reaches 50 degrees centigrade (122F) and turns it off when the temperature falls below 50C. The thermostat control saves battery life in battery systems by turning on the fan only when needed to cool the interior of the enclosure. It typically takes less than 5 minutes to cool the interior of the enclosure to ambient temperature. The system has stainless steel mesh filters which can be removed for cleaning. The unit works on 12V or 24V battery systems. It comes with a 1m long 2 wire cable to connect to a voltage source.

Informations complémentaires

Poids 1 livres
Dimensions 15 × 6 × 3 pouce

D'autres produits qui pourraient vous intéresser