Gigabit DC to DC converters with an integrated Gigabit POE injector to apply the power and data output to the CAT5 Ethernet cable. 36-72V In, 48V 17W GigE 802.3af/at PoE.
$96.10
The TP-DCDC-4848GD Gigabit DC to DC converter offered by Tycon Power® is a low-cost and high-efficiency solution for those requiring IEEE802.3af Power over Ethernet from a +48VDC or -48VDC voltage source like a battery system or telecom power source. It has an integrated Gigabit POE injector to apply the power and data output to the CAT5 Ethernet cable. The output voltage is regulated and protected. It has two isolated inputs for connecting 2 power sources, like a primary and backup power source. A metal enclosure model is available for industrial applications. It accepts gigabit data-in to a shielded RJ45 Jack and provides gigabit data-out and PoE power on the shielded RJ45 output jack. It works by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). It has various protections for surge, short circuit and overload. The unit has power outputs up to 17W.
Applications
|
DC Input Voltage |
+/- 36 to 72VDC |
|
DC Input Connector |
Removeable Screw Type Compression Wire Terminal (12 AWG Max) |
|
DC Output Voltage |
48V (802.3af) |
|
Data in & Data/POE Output Connector |
RJ45 (Shielded) |
|
Output Current (max) |
0.35A |
|
Output Power (max) |
17W |
|
Isolation |
PRI to SEC 1500VDC, SEC to GND 500VDC |
|
Self Consumption Power |
1W |
|
Efficiency (min) |
75% |
|
Line Regulation |
1% |
|
Load Regulation |
5% |
|
Ripple |
1% |
|
Noise |
1% |
|
EMC Standards |
FCC Class B EN55022 Class B |
|
Safety Standards |
CSA 22.2 &TUV EN60950 |
|
Operating Temp |
-30 to +60°C (-22 to +140°F) |
|
Operating Humidity |
5% – 90% |
|
Storage Temp |
-40 to +80°C (-40 to +176°F) |
|
MTBF (Mean Time Between Failure) |
111,863 Hours |
|
Dimensions (LxWxH) |
85 x 76 x 36mm (3.4 x 3 x 1.4”) |
|
Weight |
134g (4.7oz) |
|
Warranty |
3 Years |
| Weight | 0.36 lbs |
|---|---|
| Dimensions | 4.8 × 3.8 × 1.8 in |
