48V-72V – 600W Lead Acid AGM Battery Charger.
$320.54 – $354.29
The TP-BC48-600 and TP-BC72-600 battery chargers provide up to 600W of total charging power. The battery chargers are compatible with GEL/AGM type sealed lead-acid batteries.
The chargers have various protections for reverse current, short-circuit, over-load, over-voltage, and over-current.
There is a LED that indicates charging (Red) or battery full (Green). The unit comes with a removable AC cord with a North American Plug. The units can work from 90VAC to 240VAC (selectable via switch).
| TP-BC48-600 | TP-BC72-600 | |
| Total Power Available (for Load and Battery charging) | 600W | 600W |
| Nominal Battery Voltage | 48VDC | 72VDC |
| Battery Charge Max Current | 10A | 6A |
| Battery Charger Voltage | 58.8V | 88.2V |
| Battery Float Voltage | 55.2V | 82.8V |
| Efficiency | >88% | |
| DC Output Cable | 2 Wire 14AWG ; 1.2m (48”) long cable
Brown = V+, Blue = V- |
|
| AC Input Connector | IEC C14 | |
| AC Power Cord | IEC C13 to Nema 5-15P, 1.2m (48″) | |
| AC Power Input | 120VAC / 240VAC , 50/60Hz | |
| Hi-Pot Test | 1500VAC / 10mA / 1min | |
| Insulation Resistance | >10MOhm, 500VDC | |
| Operating Temperature | -10 to +40C (14 to +104°F) | |
| Operating Humidity (RH) | 5% to 90% (non condensing) | |
| Storage Temperature | -40 to +70°C (-40 to +158°F) | |
| Storage Humidity | 5% to 95% (non-condensing) | |
| Standards Compliance | CE, EN60335-1:2002 and EN60335-2-29:2002 | |
| MTBF (Mean Time Between Failure) | >50,000 hrs | |
| Dimensions (LxWxH) | 216 x 120 x 76mm (8.5 x 4.75 x 3”) | |
| Weight | 1.95kg (4.3lb) | |
| Warranty | 2 Years | |
| Weight | 4.85 lbs |
|---|---|
| Dimensions | 12 × 5 × 9 in |
