The TP-DCDC-1224G-4P Gigabit DC to DC converters are a low-cost and high efficiency solution for those requiring 24VDC 4 pair Passive Power over Ethernet from a 12VDC or 24VDC voltage source like a battery system or vehicle. They have an integrated 4 pair PoE injector to apply the power and data output to the CAT5 Ethernet cable. All 8 wires carry both data and PoE power. The output voltage is regulated and protected. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. Input and outputs are isolated so + or – ground is OK. They accept gigabit data-in to a shielded RJ45 Jack and provide gigabit data-out and 4 pair PoE power on the shielded RJ45 output jack. They work by supplying power on Ethernet pins 1,2,4,5(V+) and 3,6,7,8(V-). They have various protections for surge, short circuit and overload. The units have power outputs up to 24W.
9/36VDC In, 24V Gigabit Passive 4 Pair PoE Inserter (TP-DCDC-1224G-4P)
Gigabit DC to DC converters with an integrated 4 pair PoE injector to apply the power and data output to the CAT5 Ethernet cable. 9-36VIn,24V 24W GigE Passive.
CAD$123.47
Large quantity? Special projet?
Description
The TP-DCDC-1224G-4P Gigabit DC to DC converters are a low-cost and high efficiency solution for those requiring 24VDC 4 pair Passive Power over Ethernet from a 12VDC or 24VDC voltage source like a battery system or vehicle. They have an integrated 4 pair PoE injector to apply the power and data output to the CAT5 Ethernet cable. All 8 wires carry both data and PoE power. The output voltage is regulated and protected. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. Input and outputs are isolated so + or – ground is OK. They accept gigabit data-in to a shielded RJ45 Jack and provide gigabit data-out and 4 pair PoE power on the shielded RJ45 output jack. They work by supplying power on Ethernet pins 1,2,4,5(V+) and 3,6,7,8(V-). They have various protections for surge, short circuit and overload. The units have power outputs up to 24W.
Weight | 0.6 lbs |
---|---|
Dimensions | 7 × 4 × 2 in |
Features
- Input Voltage 9-36VDC
- 24V Gigabit Passive 4 Pair PoE Output
- Dual Inputs for Connecting 2 Power Sources
- Integrated 10/100/1000MB PoE Inserter
- High Power up to 24W
- Short Circuit, Over Current and Reverse/Over Voltage Protect
- High-Temperature Operation to 70C
- Built-in Low Battery Disconnect and Surge Protection
- I.T.E. Power Supply, UL Listed
- Extended Temperature Range -40C to 70C
Applications
- 12V / 24V Battery Systems, Vehicle Applications
- UBNT Airfiber®-X
- Wireless Access Points and Client Devices
Specs
DC Input Voltage |
9VDC – 36VDC, Input/Output is Isolated |
DC Input Connector |
Removeable Screw Type Compression Wire Terminal (12 AWG Max) |
DC Output Voltage |
24V (Passive) 4 pair power |
Data in & Data/POE Output Connector |
RJ45 (Shielded) |
Output Current (max) |
1A |
Output Power (max) |
24W |
Low Voltage Disconnect / Reconnect |
Disconnect at 8.9V, Reconnect at 9.02V |
Efficiency (min) |
80% |
Line Regulation |
1% |
Load Regulation |
5% |
Ripple |
1% |
Noise |
1% |
LED Operation |
RED = Input Power On, GREEN = Output Connected |
Surge Protection (IEC 61000-4) |
15kV (Air), 8kV (Contact), 20A (8/20us) Lightning |
EMC Standards |
FCC Class B EN55022 Class B |
Safety Standards |
CSA 22.2 &TUV EN60950 |
Operating Temp |
-40 to +70°C (-40 to +158°F) |
Operating Humidity |
5% – 90% |
Storage Temp |
-40 to +80°C (-40 to +176°F) |
Dimensions (LxWxH) |
125 x 75 x 38mm (4.9 x 3 x 1.5”) |
Weight |
300g (10.6oz) |
Warranty |
3 Years |