Non-Penetrating Roof Mount (STN-900-serie)

STND-900 non-penetrating roof mount. Ideal for cell and microwave installations. Supports nominal pipe sizes ranging from 2.5” to 4”. Various pipe lengths are available. We recommend the use of FOUR (4) perforated rubber mats (PRM).

Ask for a quote

Clear
Add to quote

Large quantity? Special projet?

Description

The STND-900 is the smallest roof mount available. It is a cost-effective mount for RRU’s, Antennas or small MW’s. The frame can be loaded with concrete blocks to achieve the required ballast weight to prevent overturning. We recommend using perforated rubber mats on the base to resist any sliding forces and to protect the roof surface. The mount requires minimal installation work as the frame is welded, and only the flange pipe is to be installed using four (4) bolts.

The STND-900 is the smallest roof mount available. It is a cost-effective mount for RRU’s, Antennas or small MW’s. The frame can be loaded with concrete blocks to achieve the required ballast weight to prevent overturning. We recommend using perforated rubber mats on the base to resist any sliding forces and to protect the roof surface. The mount requires minimal installation work as the frame is welded, and only the flange pipe is to be installed using four (4) bolts.

Weight 250 lbs

Features

MATERIAL:

  • Steel: CSA G40.21
  • Hardware: Gr. 5
  • Pipes: HDG Sch40
  • Material is hot-dip Galvanized after fabrication

Specs

  • Weight of Frame: 200 lbs (91kg)
  • Est. Weight of Pipe: 40 lbs (18kg)
  • Frame Dimensions: 36″ x 36″ (914mm x 914mm)
Shopping Cart