SKU: PSDIN-48-XXXW Categories: , ,

48V 120W DIN Rail Industrial Power Supply (PSDIN-48-XXXW)

$101.18$156.53

48V 120W and 240W DIN Rail Industrial Power Supply.

Clear

The PSDIN Series of Industrial DIN Rail mount high efficiency switching power supplies operate over a wide temperature range of -40C to +70C. There are two models to supply 120W or 240W. The input is 90 to 264VAC auto-ranging with wire terminal connections. The output is 48VDC nominal with an adjustment range from 47VDC to 56VDC. There is a switch for single or parallel operation. There is an alarm output to provide a dry contact closure to trigger an alarm if the DC output fails, like during a grid power failure. The relay is closed when DC output is normal and open when DC output is in fault condition due to overload or safety shutdown.

Weight 1.7 lbs
Dimensions 6 × 6 × 3 in

Features

  • High Power and rugged design
  • Short Circuit, Over-Voltage, Over-current Protection
  • 90-264VAC Auto Ranging Input
  • 47~56VDC Adjustable Output
  • Extended Temperature Range -40C to 80C
  • Supports Parallel Operation
  • Dry Contact DC Alarm

 

Applications
  • Powering PoE Switches
  • IP Phone and Security Camera Systems
  • Telecommunications

Specs

PSDIN-48-120W PSDIN-48-240W
Input Operating Range 90-264VAC ; 47-63Hz
Input In-rush Current 35A Max
Input Current 2.2A @ 115VAC ; 1.10A @ 230VAC 4.4A @ 115VAC ; 2.20A @ 230VAC
Output Voltage 47~ 56VDC (adjustable)
Cont. Load Current 2.5A 5A
Maximum Output Power 120W 240W
Peak Power (10sec @ 220VAC) 240W 360W
Line Regulation +/- 0.5%
Load Regulation +/- 1%
Voltage Overshoot <5%
Ripple / Noise 100mV Peak
Efficiency 90% Minimum
Dielectric Strength 1500V rms , 1 min, 10mA Max
Insulation Resistance 10M Ohms
Protection Short Circuit, Over-Voltage, Over-Current, Over Power
Alarm Output (“DC” and “OK”) 1A @ 30VDC, 0.5A @ 125VAC. DC OK = Closed, DC Fault = Open
Safety Standards GB4943 / EN60950-1
EMI Standards FCC PART 15 CLASS B, EN55022, EN55024
Harmonic Current EN61000-3-2 Class D
EMS EN61000-4-x Level 3&4
Operating Temp -40°C to 70°C (-40°F to 158°F)
Operating Humidity 5% to 95% non- condensing
Storage Temp -40°C to 85°C (-40°F to 185°F)
MTBF 200,000 hrs
Altitude 2000m (6562ft)
Vibration 10-500Hz 2G 10min Sweep, 20G Surge 11ms
Case Size 135 x 121 x 40mm (5.3 x 4.8 x 1.6”) 135 x 121 x 45mm (5.3 x 4.8 x 1.8”)
Weight 0.59 Kg (1.3 Lb) 0.77 Kg (1.7 Lb)
Warranty 3 Years

Ressources

PSDIN-Power-Supply-Spec-Sheet

Shopping Cart